1050 Sheet ng aluminyo

Panimula sa 1050 Sheet ng aluminyo

1050 aluminum sheet is a commercially pure aluminum alloy (99.5% nilalaman ng aluminyo) Ito ay pag-aari ng 1000 Serye ng mga haluang metal ng aluminyo. It is known for its mahusay na paglaban sa kaagnasan, high thermal and electrical conductivity, and good workability.

Due to its high purity, 1050 aluminum is widely used in industrial, electrical, and chemical applications. As a result, it plays a crucial role in areas where these properties are essential.

Key Features of 1050 Sheet ng aluminyo:

• High purity (99.5% Al content)
• Excellent corrosion resistance
• Good thermal and electrical conductivity
• Superior formability and weldability
• Soft and non-heat-treatable

Kung ikukumpara sa iba pang mga aluminyo alloys, 1050 is relatively soft and has low mechanical strength, which makes it suitable for applications requiring high corrosion resistance rather than strength.

Komposisyon ng kemikal ng 1050 Sheet ng aluminyo

Ang kemikal na komposisyon ng 1050 aluminum is primarily aluminum, with minimal amounts of other elements. The table below shows its typical composition:

Elemento	Komposisyon (%)
Aluminyo (Al)	99.5 min
Silikon (Si)	0.25 max
Bakal (Fe)	0.40 max
Tanso (Cu)	0.05 max
Mangganeso (Mn)	0.05 max
Magnesiyo (Mg)	0.05 max
Sink (Zn)	0.05 max
Titanium (Ti)	0.03 max
Iba pang mga elemento (bawat)	0.03 max

Due to its high aluminum content, 1050 aluminium sheet has exceptional corrosion resistance ngunit lower strength compared to alloys containing higher amounts of alloying elements.

Common Sizes and Thicknesses of 1050 Aluminum Plates

1050 aluminyo, a commercially pure alloy (99.5% Al), is widely available in plate form. Below are typical specifications for thickness and dimensions, though exact sizes may vary by supplier and region:

Kapal

• Metric (mm):
  Commonly ranges from 6 mm sa 50 mm. Standard increments include:
  • 6, 8, 10, 12, 15, 20, 25, 30, 40, 50 mm.
• Imperial (pulgada):
  Karaniwan 0.25″ (6.35 mm) to 2″ (50.8 mm). Common sizes:
  • 0.25″, 0.5″, 0.75″, 1″, 1.5″, 2″.
    Tandaan: Thinner gauges (under 6 mm/0.25″) are classified as sheets, not plates.

Standard Plate Dimensions

• Metric Sizes (Width x Length):
  • 1000 mm x 2000 mm
  • 1220 mm x 2440 mm (equivalent to 4×8 ft)
  • 1500 mm x 3000 mm
• Imperial Sizes (Width x Length):
  • 4 ft x 8 ft (most common)
  • 4 ft x 10 ft
  • 5 ft x 10 ft
    Custom Sizes: Larger or non-standard dimensions (hal., 2000 mm x 4000 mm or 6 ft x 12 ft) are often available upon request.

Properties and Characteristics of 1050 Aluminyo haluang metal

1050 aluminum sheet is widely used due to its unique combination of properties:

Pag-aari	Halaga
Densidad ng katawan	2.71 g/cm³
Punto ng Pagkatunaw	650° C (1202° F)
Kondaktibiti ng Elektrikal	~ 61% IACS
Thermal kondaktibiti	222 W / m · K
Lakas ng Paghatak	50-100 MPa
Lakas ng Ani	30 MPa
Pagpapahaba	30%
Ang katigasan ng ulo (Brinell)	34 HB

Mga Pangunahing Katangian:

Mahusay na paglaban sa kaagnasan: Ideal for environments with high moisture and chemical exposure.
Mataas na Electrical at Thermal Conductivity: Suitable for electrical applications.
Good Workability and Weldability: Can be easily formed and welded.
Soft and Malleable: Not suitable for high-strength applications.

Mga aplikasyon ng 1050 Sheet ng aluminyo

Due to its high purity and excellent corrosion resistance, 1050 aluminium sheet is widely used in various industries:

1. Electrical Industry

• Bus bars and electrical conductors
• Transformer windings
• Power distribution components

2. Chemical & Food Processing Industry

• Chemical storage tanks
• Food packaging and processing equipment
• Heat exchangers

3. Architectural & Decorative Uses

• Roofing and facade panels
• Reflective surfaces for lighting
• Signage and billboards

4. HVAC & Pagkakabukod

• Air conditioning ducts
• Radiator fins
• Thermal insulation panels

5. Automotive & Aerospace

• Heat shields and soundproofing panels
• Lightweight structural components

Mga Pakinabang ng Paggamit 1050 Sheet ng aluminyo

1050 aluminum offers several key advantages over other materials:

High Corrosion Resistance – Performs well in humid and chemical-exposed environments.
Excellent Conductivity – Suitable for electrical and thermal applications.
Lightweight and Malleable – Easy to form, yumuko ka, and shape.
Non-Toxic and Recyclable – Safe for food applications and environmentally friendly.
Cost-Effective – Lower cost than more complex aluminum alloys.

Manufacturing Processes of 1050 Sheet ng aluminyo

Ang produksyon ng 1050 aluminum sheet follows these steps:

1. Casting and Rolling

• Aluminum ingots are melted and cast into slabs.
• The slabs are hot-rolled to reduce thickness.

2. Malamig na Paggulong

• The hot-rolled aluminum is further cold-rolled to achieve the required thickness.

3. Pagsusubo

• The sheets undergo heat treatment to improve flexibility and remove internal stresses.

4. Paggamot sa ibabaw (Opsyonal)

• Pagpapahid ng langis o patong can be applied to enhance durability and appearance.

5. Cutting and Packaging

• The sheets are cut to customer specifications and packaged for distribution.

Comparison of 1050 Aluminum Sheet with Other Aluminum Alloys

Paano gumagana 1050 aluminum compare to other aluminum grades?

1050 ang aluminum ay best suited for electrical and chemical applications, while 3003 aluminum is preferred for stronger, corrosion-resistant applications.

Where to Buy High-Quality 1050 Sheet ng aluminyo

When sourcing 1050 Mga sheet ng aluminyo, it is important to choose reliable manufacturers and suppliers who provide high-quality products with certifications.

Factors to Consider When Buying 1050 Sheet ng aluminyo:

Mga sertipikasyon – Ensure compliance with ISO, ASTM, or EN standards.

Thickness and Dimensions – Available in different thicknesses, so select based on application needs.

Pagtatapos ng Ibabaw – Some applications may require polished or anodized finishes.

Supplier Reputation – Choose trusted suppliers with good industry experience.

Pricing and MOQ (Minimum Order Quantity) – Compare prices and minimum order requirements.

Top Global Suppliers of 1050 Aluminium Sheet:

• Langhe Aluminum
• Novelis
• Hindalco Industries
• Chalco Aluminum
• Alcoa

Konklusyon

1050 aluminum sheet is a mataas na kadalisayan aluminyo haluang metal known for its paglaban sa kaagnasan, excellent electrical conductivity, and good workability. It is widely used in electrical, chemical, HVAC, and food processing industries.

While not as strong as alloyed aluminum grades, 1050 aluminum offers a cost-effective and lightweight solution, making it ideal for applications that prioritize corrosion resistance and conductivity. Samakatuwid, when purchasing 1050 Aluminyo Sheet, it is important to select reputable suppliers to ensure high quality and reliability.